Muffler to weld in a place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm
If you plan to modify your exhaust system to a greater extent, also increasing the diameter of the passage compared to the original, then we recommend ordering a model with an increased diameter of the passage
70 mm - model RM01/70/130/350
76 mm - model RM01/76/130/350
However, if you want a more subdued sound, you can order a version with a silencing embossing, available at another auction, the RM02/63/130/350 model. Or similarly for the version with an embossing, other flow diameters:
70 mm - model RM02/70/130/350
76 mm - model RM02/76/130/350
The through-tube diameter is always the same both inside and outside the muffler. We do not use the tricks of upsetting and expanding the muffler nozzles, where from one muffler model several models with different pipe diameters are made, and in fact the diameter of the passage remains the same.
In the case of universal use, the mounting side does not matter.
Data sheet
DIMENSIONS: Length of the box - 250 - 600 mm (every 50 mm) Diameter of the box - 110/120/130/140/150/160 mm Diameter of the inlet and inner pipe - 50/54/57/60/63,5/70/76 mm
Muffler to weld in a place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can diameter - 130 mm
Muffler to weld in a place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm
Muffler to weld in a place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 450 mm
Pipe diameter - 50 mm
Can diameter - 150 mm
Muffler to weld in a place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 100x180 mm
Muffler RM MOTORS JEEP COMMANDER V8 5.7 2006-2010
COMMANDER (XK, XH)
5.7 HEMI 4x4 (EZH) 5654ccm 347KM / 255kW 2009 / 06-2010 / 12
5.7 V8 4x4 (EZB) 5654ccm 326HP / 240kW 2005 / 09-2010 / 12
Muffler to be welded on in place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected so that the assembly of the silencer is as easy as possible.
Model: E002 / 60/450
Muffler to weld in a place of the original one. Pipe diameter, dimensions of the muffler box and its length are selected so that the silencer assembly is as easy as possible.
A silencer with a straight-through construction, damped with stainless steel wool and a glass mat resistant to 800 degrees Celsius (glass mat made of full hair - we do not use scraps). Fully welded by welding robot, hand finished. Each element of the product is made using CNC technology. Crack-resistant embossed bottoms have been used.
Muffler dimensions:
Can length - 350 mm
Pipe diameter - 63.5 mm
Can dimensions - 130x220 mm
Muffler RM MOTORS JEEP Cherokee XJ, 2.5 and 4.0 benz.
Below is a detailed list of models:
2.5 (EPE) 2469ccm 121KM / 89kW 1995 / 10-2001 / 09
2.5 SE (EPE) 2464ccm 118KM / 87kW 1996 / 10-1999 / 09
2.5 i 4x4 (EPE HX) 2469ccm 122KM / 90kW 1991 / 12-2001 / 09
4.0 i (MX) 3960ccm 184KM / 135kW 1999 / 02-2001 / 09
4.0 i (MX) 3964ccm 184KM / 135kW 1991 / 12-2001 / 09
4.0 i 4x4 (ERH) 3964ccm 178KM / 131kW 1995/01-2001/09
Muffler to be welded on in place of the original one. The diameter of the pipe, the dimensions of the muffler box and its length are selected so that the assembly of the silencer is as easy as possible.
Model: E002 / 60/450
Polski
Deutsch
36 rat x ~12 zł
